ORDER FORM

Standard Media Walls

Contact us if you need a template

STANDARD MEDIA WALLS

PLACE YOUR ORDER HERE

48 Hour Production*

We can produce your Stretch Media Walls in as little as 48 hours after artwork proof sign off.

Delivery $14inc GST Delivery Per Order Australia Wide**

** The fixed shipping price is based on delivering your entire order to one location.

Select your size
Format must be PDF, CMYK, 300dpi
This page is insecure. Credit Card field should be used for testing purposes only.
$ 0.00

STANDARD MEDIA WALLS

Our media walls provide a great low cost backdrop for press conferences, interviews, trade shows and exhibitions.

The media walls have multiple twist lock adjustable telescopic poles which can vary the height and width – so you can choose a custom size to suit your application.

  • Made in Australia – at our Sydney manufacturing facility
  • Printed on our High Quality 250gsm SignWeave™ Fabric Material
  • Light absorbing Matte finish making it perfect for photography
  • Includes adjustable poles for custom sizes
  • Width can be from 1300mm to 3050mm
  • Height can be from 1000mm to 2440mm
  • High quality full colour printed fabric banner
  • Strong black anodised aluminium frame
  • Easy to assemble in minutes
  • Packs away into a strong nylon carry bag
  • Packed weight 8.3 kgs (Frame Only)
  • Packed Size 1020x240x100mm (Frame Only)
How do you adjust the size of the media wall?

The media wall includes poles which have a multiple twist lock mechanism that allows each pole to be extended. You simply twist the locking mechanism to allow the pole to extend to the required length and twist it again to lock it in place. The horizontal poles include a centre piece that does not adjust and this can be removed to reduce the media wall to the smaller sizes. Please note that it is important to determine the size you will need for the frame and to order the banner to fit this size.

How long does it take to assemble the media wall?

It only takes 2 people 5-10 minutes to set up the media wall. Please refer to our assembly guide which can be downloaded from this web page.

Can I use the media wall outdoors?

The media wall has 2 feet at the bottom for support, however the banner will act like a sail in the wind and it will easily blow over. We suggest using these indoors only. The feet could have sand bags applied and/or the frame could be tied to something for support outdoors, however we can not guarantee this would work and advise against it.

Can I order several different sizes of banners for this media wall?

Yes you can order different sizes of banners by selecting them in our instant pricing calculator and adding them to your cart. You can then use the same media wall frame and adjust it to the different sizes when needed.

Can I get a Media Wall Frame in a different colour?

Unfortunately we only stock our Media Wall Frames in Black.

How can I remove any creases from the polyester fabric?

We recommend that you use a steamer to remove any creases from the polyester fabric. It is also possible to use a warm iron but important that you use an ironing cloth so that the iron does not contact the fabric.

How long will my media wall take to produce?

We can produce your Media Wall in as little as 48 hours after artwork proof sign off.

I have multiple designs, are there extra setup fees?

Yes, our price includes the set up cost for 1 design only. If you have multiple designs for the same size you will still get the lower bulk price, however there is a small multiple artwork charge applied for each additional design to cover our extra set up costs. Simply enter the total number of signs required and then the total number of designs into the pricing calculator above – and it will work out an accurate price for you.